Images created with Linuxbuild.

The image file and mklinuximg can be used to create a RAM image loadable from
GRMON/TSIM/GRSIM/MKPROM2, custom kernel parameters, base address etc can be set
from mklinuximg command line.

The image.ram is the output from mklinuximg, a linked image ready to be loaded
with GRMON/TSIM/GRSIM/MKPROM2 and run.

FILES
=====
 up         - Uniprocessor Linux kernel with networking (network not setup)
 ngmp1      - SMP (max 4 CPUs) and networking with link address 0x0000000


CONFIGURATIONS
==============

If the configuration is stored in the directory it can be used to load the build
settings into linuxbuild,see linuxbuild manual.
1. Copy config into linuxbuild/gaisler/configs/ direcotry
2. make xconfig, Set LOAD CONFIG, CONFIG NAME = name without .tar.bz2 suffix